The architectural decision everything else follows from: a decimal calculator should store numbers as BCD — one decimal digit per 4-bit nibble. A standard byte-oriented CPU (Z80, 6502) fights that layout constantly. So I designed a small custom CPU in Verilog where 4 bits is the natural data width and memory is nibble addressable.

What the project covers:

- Custom CPU: Harvard architecture, 12-bit ISA, 8-state execution FSM, hardware stack guard with a FAULT state for microcode debugging

- CORDIC for trig functions, verified to 14 significant digits

- Two-pass assembler in Python (~700 lines)

- Verilator + Qt framework: same Verilog source runs in simulation, as a desktop GUI debugger, as WebAssembly, and on real hardware

- Scripting language on top of the microcode for adding functions without touching hardware

- Custom PCB (EasyEDA/JLCPCB), battery, charging circuit

Write-up: https://baltazarstudios.com

Hackaday: https://hackaday.com/2026/05/13/build-the-cpu-then-build-the...